Construction
Construction Safety Training From Mobilization to Closeout
OSHA Outreach courses, fall protection, heat and first aid training that fits around pours, inspections and tight schedules, for field crews and the people who lead them.
Construction Safety Training That Matches the Work
Construction sites change every week. The hazards on a slab-on-grade job in March are not the hazards on the same building in August, when steel is up, crews are on the roof and the heat index is climbing. Useful construction safety training follows that progression instead of treating safety as a one-time orientation.
Safety Is A Mindset trains general contractors, specialty trades and self-performing owners. We deliver authorized OSHA 10-hour and 30-hour construction Outreach courses, a library of self-paced online modules for specific hazards, and in-person CPR, first aid and bleeding control taught by instructors who work as emergency responders. Onsite sessions are available across Texas and the surrounding states; online courses can be assigned to crews anywhere.
OSHA's Focus Four, and How We Train for Each
OSHA's construction Focus Four hazards are falls, struck-by, caught-in or -between, and electrocution. They account for a large share of construction worker deaths, so they get the most training time.
-
Falls
Guardrails, covers, ladders and personal fall arrest. 29 CFR 1926.503 requires training for workers exposed to fall hazards, delivered by a competent person.
-
Struck-by
Backing equipment, swinging loads, falling materials and work zone traffic. Spotters, eye contact and high-visibility gear.
-
Caught-in or between
Trench collapse, unguarded rotating parts and pinch points between equipment and structures.
-
Electrocution
Overhead lines, damaged cords and temporary power. Workers learn to keep clearance and recognize when to stop.
OSHA 10 and OSHA 30 for Construction Teams
Federal OSHA does not require an Outreach card for every construction worker, but a number of states, municipalities, owners and general contractors write it into their prequalification or site-access rules. Many contractors simply make OSHA 10 for field workers and OSHA 30 for supervisors their standard, so crews can move between projects without paperwork delays.
The 10-hour course gives workers hazard recognition and their rights on the job. The 30-hour course adds the depth a foreman or superintendent needs to plan work, run toolbox talks and correct problems. Both result in an official Department of Labor card.
Role-Based Training for Contractors
| Role | Foundation | Hazard-specific add-ons |
|---|---|---|
| Laborers and apprentices | OSHA 10 Construction | Ladder safety, heat stress, hand and power tools |
| Skilled trades | OSHA 10 Construction | Fall arrest, lockout/tagout, electrical awareness |
| Equipment operators | OSHA 10 Construction | Forklift fundamentals, struck-by awareness |
| Foremen and superintendents | OSHA 30 Construction | CPR/AED and first aid, Stop the Bleed |
| Project and office staff | Employee safety orientation | Emergency and fire preparedness |
Course pages: ladders, heat stress, hand and power tools.
Training Across the Life of a Project
-
Bid and prequalification
Confirm OSHA cards, CPR certifications and required courses are current so the safety section of your bid is ready.
-
Mobilization
Run site orientation and assign online modules for the first phase of work, such as excavation, concrete or steel.
-
Active build
Add fall protection and electrical courses as crews move up and temporary power expands. Use findings from inspections to pick refreshers.
-
Summer heat
Refresh heat illness prevention for everyone, including supervisors who set water, rest and shade breaks.
-
Closeout
Review incidents and near misses and plan the next project's training before the crew disperses.
First Aid and Emergency Response on the Jobsite
Many jobsites are a long drive from a hospital. OSHA's construction first aid rule (29 CFR 1926.50) expects a person trained to render first aid to be available when medical facilities are not reasonably accessible. Our in-person CPR, AED and first aid certification covers that need, and Stop the Bleed training addresses the serious lacerations and crush injuries construction work can produce.
For larger sites and contractor campuses, AVIRT for construction adds active violence response. It is a separate program from the hazard training above, and many contractors schedule it for supervisors first.
Construction Training Questions
What are OSHA's Focus Four hazards?
Falls, struck-by, caught-in or -between, and electrocution. OSHA highlights them because they cause most construction fatalities, and they are a major focus of the OSHA 10 and 30 construction courses.
Is OSHA 10 required for construction workers?
Not by federal OSHA. Some states, cities, project owners and general contractors require it. Check your project specifications and any state or local rules where you work.
What safety training should a construction foreman have?
Most contractors expect foremen to hold an OSHA 30 construction card, current CPR/AED and first aid certification, and enough knowledge of fall protection, excavation and electrical hazards to act as or work alongside a competent person. Communication matters too: a foreman who runs a sharp toolbox talk does more for safety than one who simply signs the sheet.
Can construction safety training be done online?
Awareness and Outreach content can be completed on a phone, tablet or laptop at a crew's own pace. Fall protection equipment fit, CPR skills and site-specific procedures still need hands-on practice.
Do you train crews on the jobsite?
Yes. We bring CPR, first aid, Stop the Bleed and AVIRT training to your trailer, yard or office across Texas and nearby states, and quote other locations on request.